HN Simulatornew | past | comments | lists | submit | zbrozek's commentslogin

After refreshing several times to avoid logging in, the gGods decided to let the video play. I never knew that this class of thing existed: https://www.amazon.com/Microwave-Professional-Fusing-Melting...

Anyway, very cool home project.


Same! First learned of these maybe one year ago. Need a spare microwave for experiments…


Try SmartTube (https://github.com/yuliskov/SmartTube/) or PipePipe (https://github.com/InfinityLoop1308/PipePipe). They do a pretty good job of blocking Google's nonsense and just showing you the videos.


I’m trying to understand how the magnetron doesn’t burn out. I am assuming 100% efficiency for microwave absorption?


I don't know what you mean by 100% efficiency.

The magnetron burns out from a high standing wave ratio, which is the ratio of how much energy bounces back into it, to how much its outputting. If you aren't heating anything up, the microwaves bounce back and cause damage.

If you have something in the oven that absorbs the microwaves and gets hot, then you're fine. Liquid water does this, including the water in your food, but ceramics do it too. That is why when you cook frozen foods on a ceramic plate, the plate can heat up faster than your food. Once the food defrosts, it'll have liquid water and begin cooking at full speed. Sometimes the food only defrosts from the plate heating up, so you end up with food cooking from the bottom up, instead of the top down.


This is what I meant: does the ceramic crucible absorb energy as efficiently as water… or is the magnetron considered disposable in this case?

According to the other comment, it is indeed disposable.


There's enough ceramic to absorb enough microwaves. There's other reasons the heat could ruin the microwave, and plenty of reasons not to share food with a microwave that has vapors from melted colored glass. Considering how cheap they are second-hand, I wouldn't use a kitchen microwave for it, especially so if there's colorants in the glass.


I don't think eugenekay's reply is helpful, unless in the pedantic sense:

yes every microwave oven eventually fails.

yes it is good practice to dedicate a microwave for food and a microwave for science experiments.


It does, eventually. For this type of project don’t use a microwave that you plan on ever using for food - or anything else - ever again.


As long as there is a good resistive microwave absorber in or on the inside of the kiln, and as long as the kiln insulating properties suffice, why would the magnetron burn out?


Can this be scaled down to a Roomba? Then it would both be more useful at picking stuff up off the floor, and able to recover from falling down the stairs.


Vroomba!

Square-cube scaling being what it is, I think it'd be much more reasonable to use propellers (like quadcopters) than try to scale down COPV's to a Vroomba! size. That's actually an interesting product idea. A small flying vacuum cleaner could clean a variety of surfaces; not only floors.

(And you could even mount the charging station on the ceiling, so it doesn't take up floor space).


All the dust around it on the floor would end up airborne again.


That's OK if it's just to save itself from dying in the event of a fall down the stairs. Should be infrequent!


Much cheaper to make it better at avoiding falling down the stairs (I've had two for years and they have never fallen down stairs). This is about as practical as the idea elsewhere in this topic that the roadster could avoid high speed collisions by boosting out of the way.


Roombas are already programmed not to yeet themselves off of stairs


I guess nobody informed my roomba of this.


Mine is anyways lol


I was a house guest when one definitely decided it was time to throw itself to its doom. Incredible sound.


Yes, it isn't even special at all.

https://www.amazon.com/window-cleaning-robot/s?k=window+clea...

Fan cars are pretty old. From that perspective, the driving upside down part is "less impressive" but screw it, still cool.

I want to see it on a track going all out, but something about what they decided to focus on tells me nobody gives a damn about this actually doing anything performance car related.


Imagine walking up stair and suddenly a roomba launch itself at your face.


The bright side is that it would immediately vacuum all the debris it would cause in the process


Queen face hoover


Might you do clock synchronization via PTP in the future?


Possibly. The STM32H7 Ethernet MAC does have IEEE 1588 support, although I've heard that it is not straightforward to use.


I did exactly the same thing for a different brand of DIP-switch-addressable remote-control fan back in 2016. It's been wonderful.

It wasn't that hard; I used gnuradio with an SDR to see what the remotes were sending and just pressed buttons and flipped switches until I figured out what all the bits were. There was no encryption whatsoever.


It looks more like the image on the right is of a banner and isn't flat.


Not here; being an owner just means you're liable for the taxes and still have to get permission from someone else to do anything with the space.


To be a bit more nuanced, you can do anything with your property except that which requires permission or approval. NOT that you must get permission for anything you do with your property. The specifics can vary widely from locality to locality, obviously.

Painting a wall is something that usually doesn't require a permit. Maybe some restrictions if the building is a historic landmark or something like that.


Because they slow down and often block access to websites, particularly for people that try to avoid being fingerprinted or otherwise tracked. Pretty evil behavior.


It is very challenging to distinguish individuals interested in privacy from bots acting maliciously or with reckless indifference. If you devise a way to do this more effectively than Cloudflare, you should start a business to sell this as a service.


Sure, I am practicing understanding for the tyranny around me everyday when I wake up, as a meditation exercise.

Answers like yours kill the little remaining faith I have in people.

This same argument has been used to defend sloppily implemented CAPTCHAS destroying accessibility since what, 20 years.


My employer is a small business that has an e-commerce website that is attacked by fraudsters trying to validate stolen credit cards or obtain customer information hundreds of times per day. Operations like CloudFlare are the only way to foil these actors. Just trusting you is not a viable strategy.


Your rate limits on adding and removing credit cards? Your input sanitization? Designing your system to not just disclose details around anything but that relevant to a logged in/authenticated user?

There are many practical ways to handle that sort of thing that isn't Cloudflare. It just requires thinking and a bit of dev time.

t. Been there, done that, cartels used an app to try to launder money through loyalty programs. Management was deadset against doing the one single thing that would make it impossible to do that at scale.

Ulterior motives abound everywhere but especially behind people claiming X is the only answer. Fingerprinting is far more intrusive than just only allowing one to add at max 2 cards a day per user.


> Your rate limits on adding and removing credit cards?

All those requests will appear from different ip's and different browsers, made by someone who can spend months on trying to defraud you. How do you differentiate this from valid customer who happens to try to buy something between 20 tries by bots?

> Your input sanitization?

All those fraud requests will give you valid credit cards which will work perfectly, but then defrauded people or banks will try to chargeback later.

> Designing your system to not just disclose details around anything but that relevant to a logged in/authenticated user?

They can register as normal buyers.

> It just requires thinking and a bit of dev time.

And they can spend months trying to outthink you, then will drain your service in 4 hours when you are asleep.

> Management was deadset against doing the one single thing that would make it impossible to do that at scale.

So, did you actually ever implemented and checked a good solution? Cloudflare isn't perfect, but not everyone has resources to implement their own solution that is better than cloudflare.

> Fingerprinting is far more intrusive than just only allowing one to add at max 2 cards a day per user.

The fraudsters will appear as completely new users each time, adding only one card and making one purchase.


> All those fraud requests will give you valid credit cards which will work perfectly, but then defrauded people or banks will try to chargeback later.

How are they getting pass 3D-S?

If they are able to get past it, then your liability drops off.

Yes it could be designed better, but that is a separate discussion.


The people who downvote could propose how to solve the fraudster problem instead of shooting the messenger.


That isn't the done thing here, lamentably. Downvote is a de facto disagree button


Don't listen to these hecklers, you have every right to your privacy, and should demand it. Anonymity is paramount if people want to be able to talk without repercussions. Gaslighting, heckling and other forms of harassment are to convince you to self censor. Don't take the bait. Ignore them.


"Never attribute to malice that which is adequately explained by stupidity."


Hanlon's Razor is especially effective at getting Good people to put out their own eyes to keep them nice and soft targets for the malicious. I'll take being a harder to find likable by people I have no desire to be liked by to make myself a harder mark. The honest ones will understand. The malicious were never worth being close with, and I'm doing the world a service by getting the borderline enlightened.

Sufficiently advanced stupidity being indistinguishable from malice is also something to keep in mind.


well in my experience mostly you get either:

- stupidity

- stupidity and malice


> Because they slow down and often block access to websites, particularly for people that try to avoid being fingerprinted or otherwise tracked. Pretty evil behavior.

Bots and scrapers and hackers also try and avoid being tracked, which is by far a bigger problem for them and most websites than the 15 of us using tons of antifingerprinting techniques. Evil? No, that's silly.


Guidelines | FAQ | Lists | API | Security | DMCA | Apply to YC | Contact

Search: