I like Pattinson, but the fact that they didn't cast a rather unknown actor (as they did in the past) signals that they don't think their script and the James Bond brand could be sufficient to attract audiences on its own.
That's either because they are not confident in what they have or aim for 1bn USD in revenue, both is not really a comforting perspective...
yep, also my takeaway from the article, and I can see the point.
It's kinda like always shooting photos in RAW, always 4-5 photos of every scene, but then never taking the decision/work which of them is representing the scene you were trying to capture.
Shooting RAW makes perfect sense when you’re both photographer and editor. It lets me defer technical and creative decisions until later, freeing me to focus on capturing the moment. Anything technology can do to reduce the number of variables I need to think about at the time of capture is a win imho.
What I’d really like to see in future cameras is subject-aware shutter speed selection, where the camera intelligently sets a minimum shutter speed based on what’s happening in the scene. I’d also love real-time feedback on image quality: the camera analyses a shot within a second of capture and give a subtle beep or chime if, for example, neither eye is in focus or the subject is blurred by motion. The less time I spend worrying about the technical details, the more attention I can give to the photograph itself.
> "Shooting RAW makes perfect sense when you’re both photographer and editor."
Exactly. And that article describes a scale where both tasks are assigned to different roles, with the videographer mainly working to create more room for later decision-making (than practically needed).
in my (exaggerated) simile to casual RAW photography, the photographer defers technical and creative decisions to a later step that then never happens, so he actually never conveys his message of that captured moment.
In this context the article makes most sense to me.
"You are there, you know the equipment, you know what you want to capture, go and do it."
> "And you can convert log footage to REC709 in a way that would give you the same result as if you'd just recorded in REC709 to begin with"
I think beside of this extra-step in post (which comes with its own set of parameters again), that's part of his point:
The videographer didn't expose for a specific look in a scene, he didn't decide at all and postponed to post-production. This is not adding value, it's creating work.
"Many times a videographer will shoot log incorrectly – generally underexposed – expecting to ‘fix it in post’. The same issues apply to shooting in camera raw or HDR."
He's a colorist, stating that many videographers shoot log incorrectly and decide to defer the work to post-production, creating unnecessary complexity and bad source-material.
The plea is for filmmakers to stop following the hype, use what they are experienced with and take ownership of exposure again ("Many times a videographer will shoot log incorrectly – generally underexposed – expecting to ‘fix it in post’").
Because in his experience log doesn't add substantial value, it creates lower-quality base-material with substantial post-production work.
It makes sense. Creative work comes from decisions being taken, log means that the videographer is not deciding but is deferring the task to post-production, creating a unnecessary burden (and possibly diluting his own creativity).
...which would explain why camera manufacturers push for log formats: even if the footage is shot badly, it's still possibly (probably?) recoverable, so they (the camera manufacturer) avoid reputational damage from people blaming the equipment rather than the operator.
Technically, the issue if I'm getting is that the camera physically (or in teh encoding) will be better at capturing within a certain range that you adjusted for, having parts above or below that isn't capture properly and if material is in those above or below ranges the output after grading will not have a good range of values (ie possibly introducing banding).
Underexposing probably feels like a "safe fix" rather than adjusting properly all the time since with more limited ranges it'd be easy to "wash out" with overexposure (irreparably removing things due to clipping), and with budgets cut it's probably easy to just skimp on a lot of these "details" if the system "is capable".
So it's budgets/speed/creativity at shooting time vs material that might just not be good to work with in the end. (Also as he mentions some of these systems aren't as sensitive, probably leaves a situation where some people who's used the better systems just don't realize that it's a problem coming to others).
Edit: Noticed some other comment mentioning that these "log" encodings are 10bits, yeah that's going to leave a bad trail of numeric resolution if you've exposed badly, it'll probably be workable for a huge range but it's not enough by far to recover really badly exposed stuff.
I see the rationale for the other side. But it's the "safe fix" as you said, to create maximum room for a decision-maker in post.
The way I read it, the point is especially for experienced videographers to stop playing it safe but "making the call".
The author implies that many of them now "shoot for post-production" which basically leaves alot of their skill dormant to just create much more tuning/decision-work down the line.
From the perspective of a colorist it makes alot of sense to me. The shot and its "message" should be decided on-set already, deciding ALL of this in post is not creating as much value as people think, it rather dilutes the work as a whole.
Or as Orson Welles said: "The enemy of art is the absence of limitations"
Couldn't a camera just show a grade in the viewfinder while still recording in a log format. The viewfinder settings could be saved as metadata, perhaps with some margin so that a "saturated" capture can still be brought back a little in post as needed.
This is one of those problems that shouldn't exist in theory, but reality doesn't care.
Self-taught videographers who may have a background in still-photography using camera-RAW are used to a workflow that captures (mostly) in linear space. They were limited by ISO noise but, with modern sensors, other than that they had so much data in the shadows that the only thing they had to fear was blown-out highlights. Hence the tendency to underexpose and just pull out the details in lightroom or whatever. They treat log as some kind of camera-RAW for video. Some camera manuals (Sony?) will tell you to "overexpose" log by one or two stops due to where the log-curve places midlle/18% gray, and that is not what feels "normal" to those users in their viewfinders/displays...
If it is not a well-managed production, all other sorts of metadata problems compound. Source material may just be delivered as generic MP4 files that don't necessarily carry all the information people are used to from the still/RAW world, where your "digital negative" has all the information you could ever wish for in one neat place...
> They were limited by ISO noise but, with modern sensors, other than that they had so much data in the shadows that the only thing they had to fear was blown-out highlights.
Photography has leaned towards towards overexposure dating back to (at least) Ansel Adams:
Not on digital though. It could be that recent advances in sensor tech have changed the staus quo but it used to that the way film dealt with blown out highlights was more visually pleasing and you could still recover some of it, whereas early digital sensors simply clipped. So on digital if you know you’re going to be editing in post you’d rather slightly underexpose.
For negative film, yes; not for slide film and certainly not for digital sensors, where the advice has always been to avoid blowing out the highlights, because they're unrecoverable. Whereas, with raw images and modern sensors, underexposed areas can easily be brought up.
Yes and is generally how I train it for our videographers.
Reference colours and exposure in the target space using a lut on body or on the viewfinder, recording in Log or even Raw because we can change it in post.
Usually the LUT it was shot on is in the metadata.
Yes, my Blackmagic Pocket Cinema Camera 4Ks can do:
- An exposure histogram
- False color exposure highlighting
- Apply a LUT in real time
All of which can be used to monitor correct exposure while recording. Lesser cameras that omit these make it much more difficult to properly shoot with.
> ("Many times a videographer will shoot log incorrectly – generally underexposed – expecting to ‘fix it in post’").
At least in photography, the general rule of thumb is if you're going to err, to at least err to overexposure: you'll still capture some details and you can pull down if needed; if you underexpose it's much harder to fix things.
This goes back to even the film days ("Expose for the shadows…" — Ansel Adams).
> "if you're going to err, to at least err to overexposure"
That's a rule from analogue photography ("Expose for shadows, develop for highlights").
In digital photography this is now flipped ("expose for the highlights"), because if your exposure is clipping in digital imaging the pixel turns pure white and all details are lost.
--> Hence the experience of the author that log is more often underexposed: Instead of exposing for the scene, Videographers underexpose to reduce risk of losing highlight details
You were the one who half-quoted Ansel Adams' "expose for the shadows, develop for the highlights", which refers to (black & white) film photography as a 2-step process of exposure and development.
"exposing to the right" is the flipside of this, and suggests to catch as much light as possible without clipping, as in digital photography this achieves the peak-performance of the digital sensor.
The author states that videographers DON'T do expose to the right, but instead shoot in log and underexpose, so the highlights are not clipping and (someone) can fix it in post-production.
It's clear WHY this is done (because it skips the exposure evaluation step), the plea of this colorist is to NOT do this because it's creating more work than value.
> "exposing to the right" is the flipside of this, and suggests to catch as much light as possible without clipping, as in digital photography this achieves the peak-performance of the digital sensor.
All of these things are saying the same thing: collect more light on recording (your histogram is weighted more to the right; overexposure), and then bring down for the final work.
No it doesn't. Analog film is different to digital capturing.
"Expose for the shadows, develop for the highlights" comes from analog film. It means that you can afford to overexpose the highlights for the sake of getting more shadow-details, because you can bring the higlights back down in development.
In digital imaging you can NOT do that. If your highlights are overexposed in digital you cannot bring them back in post-processing, they will be pure white (255,255,255)
> In digital imaging you can NOT do that. If your highlights are overexposed in digital you cannot bring them back in post-processing, they will be pure white (255,255,255)
"Overexposure" does not (just) mean 'pinning the values to 100%' ("clipping"). (Purposeful) Overexposure means 'bringing in more light such that 18% grey is no longer Zone V':
As others already commented, on digital most videographers protect the highlights and underexpose the shot. However, deviating from the ideal exposure creates many color issues, specially for skintones. This is why the author is likely frustrated.
Check the "Latitude" section on this SonyA7IV lab test for visually understanding the issue for example: https://www.cined.com/sony-a7-iv-lab-test-rolling-shutter-dy...
man people were saying this like a decade ago. back when cameras were more limited and log allegedly offered a way to squeeze more out of non-raw footage, i remember people getting mad at the log look and colorists hating working with it.
i tuned out of filmmaking a while ago but it is funny to see people say "stop following the hype don't shoot log" because this was the hype over a decade ago when vimeo was overtaken with dslr/mirrorless "cinematic test videos". i don't know that it's hype as much as it is the internet is filled with amateur filmmakers writing articles and making vids not truly understanding the tools they are working with. if this is a colorist working for actual productions it would be weird to me that a dp might not know these things. feel like a good dp has enough understanding of the colorist pipeline to not just recklessly chuck log footage at them, especially on sets where alexas and reds are rented
> "Notably climate change doesn't seem to be explicitly mentioned"
If it'd be my study, I'd also avoid mentioning climate-change explicitly.
With the (US-governments') move from mere verbal denial of climate change to institutional and policy-level skepticism of everything and everyone just using the term, it could cause the whole paper to be dismissed in discussions of some circles...
As if "some circles" were going to do anything about declining elephant populations to begin with. "Obeying in advance" isn't going to save you, your paper, or the elephants.
(With the assumption that climate change is one of the causes.)
Avoiding the words "climate change" or "global warming" but still providing the data to conclude this is not "obeying in advance" or denying the cause, it's "handling politics"
It's more about getting the message across without the risk of being flat-out rejected immediately just because of some "trigger words".
I'm not surprised that this doesn't change the CPU temp.
The important heat-exchange from the CPU is usually managed by a heatsink and a radial fan, with the grille of the casing designed as fan inlet/outlet.
Blowing/sucking additional air at the inlets doesn't affect the cooling surface of the heatsink, it just blows at the radial fan.
This may make sense if there's a weakness of the radial fan (that heat is building up at the heatsink which the original fan cannot remove).
But it's much more likely that the heat is not distributed well away from the CPU, either to the heatsink (thermal paste) or by the heatsink (weak heatsink design/material).
I'd look into ways to replace the radial fan or the thermal paste
(suggestions to expand it will be made in a dedicated PR /s)
Great to read that there are still people out there sifting through the noise of Agents shooting PRs in all directions.
In the end you may have to recruit an AI agent to do the (pre) review, otherwise you're ending up being the only human driver on an automated highway (place mental image of Will Smith in I-Robot here)
I'm reminded of the poor human moderator of that German wiki that OpenAI agents hijacked as a message board, who spent hours reverting edits and removing slop pages created by the AI.
That's either because they are not confident in what they have or aim for 1bn USD in revenue, both is not really a comforting perspective...
reply