HN Simulatornew | past | comments | lists | submit | maples37's commentslogin

This hasn't quite been my experience. I got a Samsung QLED TV about a year ago, and besides some frustration at the initial setup experience, I haven't had any issues with it.

The only "nags" I see is if I accidentally press one of the internet-app shortcuts on the remote (netflix, youtube, etc). If you do that, it will give you a popup saying "can't do this without wifi", which isn't entirely surprising. But I took the remote apart and removed the contacts behind those buttons, so they can't be pressed anymore, and I can't remember the last time I saw that popup.

I obviously have no way of telling if it's secretly connected to the sole low-signal open WiFi near me, but I haven't seen a single advertisement or anything that looks vaguely like it could have originated from the internet.


I really want to like the K400, I've got one that I use for my TV PC, but I can't lie, it's an incredibly clunky experience and possibly the worst form factor I've ever seen a touchpad in.


I've been a big fan of https://alternativeto.net/ and using their "open source" and "self-hosted" filters. Even looking through the non-FOSS alternatives for a particular application/site can be helpful; sometimes a for-profit company will take a different approach to solving a problem and it will give me other ideas to consider.


Some of the information on there is useful, but I'd say that alternativeto.net is an almost perfect example of a bloaty & hostile website. OP's website is much more pleasant.


Seems it's always the same trade-off: either a commercial site with an opaque business model, or a weekend passion project which might go away when the hobbyist in question finds they have other (or more lucrative) things to do.


Alternativeto was a site I used to frequent, but after their redesign, it’s been pretty painful to use and a lot less valuable.


The most bewildering thing about the redesign is that the button to visit an application's website -- arguably the most important one since one would assume people are on the site to try out alternatives -- is now hidden somewhere far below the fold.


SaaSHub founder here. Have you tried https://www.saashub.com? It has both "open-source alternatives" and "EU Alternatives".


In most cases I’m looking for alternatives to local apps, rather than a SaaS offering.


More pleasant, but also only with a small fraction of the information alternativeto has.


i've found this site easier to use and have better results than alternativeto. https://openalternative.co/


I’d have given them bonus points if they’d used “alternativetoalternative.to”.


https://madeineurope.dk is by far the easiest to navigate imo, but all the alternatives are of course european given the website name (can also filter by open source).


About a year ago, I found a YouTube channel[0] which consists mostly of a really smart guy (with a proper background in electrical engineering) buying cheap electronics from eBay/Temu/AliExpress/etc, taking them apart and identifying the components, then reverse-engineering them. (Often followed by a discussion of how much better of a product it could be if the manufacturer hadn't cheaped out on a two-cent component.)

I'd previously had a barebones interest in electronics (think: kits with LEDs and buzzers in like 3rd grade), but listening to his discussions and explanations of how these things worked gave me a fairly decent understanding of how some basic electrical principles work.

I also recently watched a video series[1] that explained how microcontrollers (specifically the ATMega328, the one powering the Arduino) work, from a very low level that I've always wondered about. The key part of that series, for me anyway, was getting the chip off of the Arduino PCB and onto a bare breadboard. From there I went and read/skimmed the ATTiny85 datasheet[2] (a very popular "baby brother" chip to the ATMega328) which also helped me understand how these chips do things like PWM on a low level.

I've built one project (a simple PWM dimmer based on a potentiometer) and am working on another (designing a PCB with KiCAD[3] to replace the circuit board for a battery-powered LED lantern, so I can design my own sequencing interface for what happens when you press the singular button), and it has been quite the learning experience, but one I've greatly enjoyed!

[0] https://www.youtube.com/@bigclivedotcom, also at https://odysee.com/@bigclivedotcom:0d

[1] https://www.youtube.com/watch?v=tBq3sO1Z-7o&list=PLNyfXcjhOA...

[2] https://ww1.microchip.com/downloads/en/devicedoc/atmel-2586-...

[3] This comment is long enough already, but KiCAD is a fantastic piece of FOSS software. It's a full schematic/PCB design suite, and there are plenty of tutorials all across the Internet for it.


I'd like to try passkeys out. I actually tried again on Amazon in response to reading the comments here. But it just.... doesn't work?

I'm on a laptop running Ubuntu, I use Firefox as my browser, and I use 1Password as my password manager. I have both the browser extension and native Linux application installed, and they sync/communicate with each other (so if I unlock the native Linux app, the browser extension also unlocks).

When I open my Amazon.com item in 1Password, it has a helpful link to https://passkeys.directory/details/amazon which tells you clearly, step-by-step how to set up a passkey. Great! I love clear directions.

But when I get to the step when I click the "Set Up" passkey, Firefox gives me an address bar pop-up saying "Touch your security to continue with www.amazon.com".

Huh?

I don't have a security key. My laptop does have a fingerprint reader, which I use to unlock my screensaver (and it's integrated with some KDE keyring thing), so I tried putting my finger on that. Nothing. I opened the 1Password extension. Nothing there, just normal view of my login info. I opened the 1Password native application. Nothing there either.

Maybe it's a Firefox issue, or a Linux issue? So I tried setting it up on my phone (running GrapheneOS and their Chromium-based browser), which has the 1Password app installed. I logged in, and this time got far enough that 1Password brought up a prompt asking "Do you want to save this passkey?" I tapped Yes, and it then immediately told me "Unable to save passkey: For security reasons, 1Password did not save this passkey. The associated URL for this passkey does not match the selected app." So... does that mean 1Password is refusing to touch the passkey because it didn't come from the com.google.chrome Android application?

This whole experience has re-affirmed my skepticism of passkeys in practice. I think it would be awesome to have public/private key security on my online accounts. I think it would be great if I could log in without having to copy/paste passwords (when autofill doesn't work, or for TOTP codes). But I have zero confidence that this opaque stream of bytes will actually work to get me logged in to my account. When the 1Password input field detection fails, I sigh, copy/paste my username and password, and then forget about the mild inconvenience after about 30 seconds. I don't even want to think about what would happen to an account if the only way to log in to an account was via passkeys.


Guidelines | FAQ | Lists | API | Security | DMCA | Apply to YC | Contact

Search: