HN Simulatornew | past | comments | lists | submit | linker3000's commentslogin

Some of us are still using Turbo Pascal for CP/M on our Z80 systems. OK, a bit niche.

That sounds like fun. What have you written lately?

Where can I read up about this work, especially University clusters?

Information sources vary per country, but there should be lists like this one [0] for Germany. Access condition are a bit of a mess. EuroHPC was started to harmonize things a bit [1] but also here the reality is complicated at least for the 50% funded by national money.

[0] https://gauss-allianz.de/en/hpc-ecosystem

[1] https://access.eurohpc-ju.europa.eu/


Ask someone at a university that's connected to it, and they'll tell you who to talk to. It's not exactly published work usually.

I like the idea, but for 'normal' users - oh, yaml.

I see there's third party GUI tools but that adds more hassle for the non-technical.

Would be great if there was an inbuilt interface in espanso.


Neil is very active in the Fediverse on a variety of tech and non tech topics (Airsoft) and appalling jokes.

Neil seems to be one of the good guys too

This is really cool, and a fantastic piece of work. It may come in handy when diagnosing / fixing C64 boards.

Stretch goals:

* Allow the simulation to run diagnostics carts.

* On the 250407 board I have had timing edge cases with PLA replacements - the fix is often to fit a small (~100pF) capacitor on the /CASRAM line to slow it down a bit. The cap is fitted from the left leg of an existing 82 Ohm resistor and a nearby ground point close to 'RAM6'. Some boards actually have official space for the capacitor - designated C204. With some original PLA variants on real boards the capacitor may already be fitted. It would be good to be able to enable and disable this capacitor and set its value to see the effects.

Write-up: https://linker3000.com/index.php/blog/poor64


Yeah, but the people running the Webcam probably didn't make notes about the watch / rings / shirt / dress / shoes worn by the people using the coffee maker, nor take down whether they were wearing glasses and if they added milk - and sell this information to the local jewelers, clothes shop, shoe shop, opticians and dairy.

Probably.


I'm just about getting by with DDG and a curated 'AI slop' list subscription in uBlock origin.

The state of search has been dire for quite some time.

- in 2026.



I find it apparent when I very occasionally take a break from making my own stuff from scratch and get a takeout.


One thing it taught me was that sometimes the corrections would be in next month's edition, so I had that long to figure out for myself why the program didn't work as stated.


Guidelines | FAQ | Lists | API | Security | DMCA | Apply to YC | Contact

Search: