HN Simulatornew | past | comments | lists | submit | leoedin's commentslogin

Honestly, having an experience of something as a kid gives you absolutely no insight into what it's like to be a parent. Not to mention that every child is drastically different and will react very differently to the same situation.

I thought the millenial journey of discovering their parents sucked through therapy was almost a trope at this point. Certainly the previous generations had more kids, and probably spent less time actively parenting them.

> Certainly the previous generations had more kids, and probably spent less time actively parenting them.

Yes but those kids weren't at real risk of having their minds completely subverted by for-profit organizations.


Yeah, give me the iPhone's hardware running Android please. I switched to iPhone because my Android phones kept dying due to hardware issues. Android has a far better keyboard and notification system. Give me it any day.

This is what I want too.

A really neat concept. It uses a special hinge design, a magnetic encoder and torque modulation to control the lift of the rotor as it spins. Completely negates the need for a conventional helicopter's swash plate.

The single motor does have the pretty major downside that it spins the moment it's in the air. I suspect a 2 motor drone with a tail motor would be a lot more practical. But I really like how mechanically simple the rotor hinge design is - it pushes all the complexity into the control algorithm.


Note that the concept itself has been done before in RC helicopters. The only difference here is using a one-propeller drone.

https://hackaday.com/2020/06/25/building-and-flying-a-helico...

https://www.youtube.com/watch?v=d80oXSCcHTk


Yep, he mentions the video you linked as well. (Mentioning because I watched the video you linked first.)

Perhaps there are specific applications where the payload spinning could be an advantage, imaging/scanning perhaps (which in the video is going to be in the next iteration for the builder).

I don't think it would be all that useful, give the very way it works (modulating motor speed) - your rotation would not be consistent in speed during even a single turn, which makes exposure times different each frame, and possibly too low.

GP is right and the exposure time difference can be dealt with in software because you can model it. The degree to which you can modulate a modern CCD's exposure time dwarfs the speed of rotation.

Couldn't you use one motor attached to two props spinning in opposite directions?

You absolutely could, and that's exactly how a lot of RC helicopters have been flying around for decades now.

https://www.scribd.com/document/840293339/Lama-V3


It seems kind of strange that the entire meat industry exists and is tolerated, yet a few horses in Central Park are making people so angry. Surely these horses have far better lives than the cows did that everyone's tucking into over lunch?

They're in proximity to people that run on a progressive threadmill. When it became socially opportune to so i've seen city folk elsewhere shift their animal rights stance to defend halal slaughter laws deeming it to be progressive because it's tied to a group lower on the proverbial ladder.

There’s nothing more cruel about halal slaughter, as long as they stun (which most do), than the common method.

That's a load-bearing "as long as".

Animal welfare laws don't give atheist butchers the option to be cruel. They're required to stun the animal first. Why give halal/kosher butchers the option to be cruel? Especially if you claim "most do" choose to stun.

Be kinder to animals, change "most do" to "all do" by removing the religious exception.

...and then come the progressive types to defend 1000+ year old ritual slaughter customs.


In the US at least, freedom of religion does grant some exceptions. The Amish do not participate in Social Security and Medicare, for instance, but I cannot opt out. I’m not sure how it works other places.

I’m not saying I endorse this, but that is why.


It’s not about animal rights at all. Animal rights angle is the strawman used by TWU. Source: I spend 7h in CP/week

Searching those acronyms didn't help me and i'm not american. Can you enlighten me?

Presumably any and every religious tradition on slaughter is better than max-capitalism factory farming style?

What's objectionable about halal?


> Presumably any and every religious tradition on slaughter is better than max-capitalism factory farming style?

It's really not. You're mixing two things, "max-capitalism factory farming" alludes to how the animal is treated while it's alive, e.g. caged hens vs free-range hens, while what we're talking about here is animal suffering via religious ritual slaughter.

Kosher and halal slaughter are not animal-friendly. They mandate cutting the animal's throat but preserving its spinal cord so it feels every possible pain in its last moments alive as the blood drains out.

Stunning it before death and/or putting a bolt through its brain would be a lot more humane, but those methods didn't exist when those religions came up their rules, so of course not one iota of progress can be added.

Read more about it:

https://en.wikipedia.org/wiki/Dhabihah

https://en.wikipedia.org/wiki/Shechita

https://en.wikipedia.org/wiki/Legal_aspects_of_ritual_slaugh...

https://en.wikipedia.org/wiki/Electronarcosis

https://en.wikipedia.org/wiki/Captive_bolt_pistol

You'll see that authorities in e.g. the UK have been asked to regulate kosher/halal butchers, require them to at least stun the animal before doing their ritual slaughter... and the authorities chose not to, and let them keep their religious exemption to animal cruelty laws. Kosher and halal slaughterers can choose to stun the animal first, which would be humane, but they don't have to.


Thank you, that was really informative, I was totally mixing those two things. Perfect case of Cunningham's law.

The fact that kosher/halal are very similar is a hilarious wrinkle for the culture war aspect that OP was pushing.


I don't normally talk about downvotes but whomever downvoted the informative comment from amiga above should not have, it was very interesting, I learned from it, and as such it's in line with hacker news ideal.

There's nothing strange about this. You're just failing to recognize the obvious.

Would you seriously have the heart to, say, kick, injure, and torture a calf or lamb that you know was heading for slaughter and was going to end up on your plate?

Do you also fail to see why people ban torture despite still permitting killing in circumstances like capital punishment or war or self-defense or whatever? Would you be okay with getting tortured during your life if you were sentenced to death?

Just because society blessed your excuse to kill a living being, that doesn't make it strange or illogical to oppose your cruelty or their torture during their life. I'm not even taking a position here; this is so obviously not hard to comprehend. If you're looking to point out hypocrisy, this is not an example of it.


You should re-read the comment you replied to. It was not commenting on the killing of animals, but rather on the horrific ways animals are abused while they live. The killing is the least odious part of the meat industry.

The dairy industry is worse.


Everyone is talking about the slaughter method in the other threads...

Anyway, even in that case, I can't make sense of this logic. You're expecting people to condone cruelty on their own front porches in the city that their government has full jurisdiction over until they tackle the cruelty of industrial agriculture in other jurisdictions? I guess they can't tackle homelessness in their neighborhood either until they feed and shelter the children in Africa? Otherwise they're hypocrites?


You think the animal rights activists who are opposing the carriages are tolerable of the meat industry? This is just low hanging fruit.

But the activists are not the point. Animal rights activists are a minority, things change because the majority or a significant share of people backs them.

In this case this large group that backs banning horse drawn carriages is very likely eating industrially produced meat. That’s the inconsistency, 95% of Americans eat meat and a substantial share cause far greater inhumanity on animals through their diets which are completely optional (as in, they could vote with their mouth and stop it), than these horse drawn carriages which they want to ban.


I think if a bunch of horses were dropping dead in my city from heat exhaustion, and the only upside to having them was that they congested the roads and left shit everywhere, then I would weigh the two and probably say better to not have them. Turns out 78% of registered New Yorkers agree. Maybe they are all massive hypocrites and should actually support this, since they also eat meat.

Horseshit sucks and being around those animals in a city sucks so it’s an easy sell.

The meat industry at least has a useful output. Horse drawn carriages have no meaningful benefit and a long list of drawbacks.

Does anyone do this without the vendor lock-in? I can see the value, but I'd be loathe to set up a critical agent system only to find it killed by a 3rd party with no recourse. Is there a self-hosted option?


Have a framework how the AI is allowed to work and keep that as a git repo.

That way you can tell AI 1 to write into it and AI 2 can see where every work you do is currently standing and continue from there.


Vikunja is a decent project management layer for this I've found.

I’m currently running Paseo for agent orchestration for code, beads managing tasks, and OpenWebUI for stuff that’s more on the business side (with RAG or MCP to our drive, CRM, etc). It’s mostly human triggered though it doesn’t have to be. Paperclip might be a more LLM-managed option.

All of it is self hosted, models are Ollama Cloud and OpenRouter. You can throw dirt cheap models at a lot of these tasks and they perform very well. It’d be no effort at all to replace inference providers.


I run a Matrix server with federation turned off. My agents hang off that, and uses an abstraction over Anthropic + OpenAI + Kimi + GLM5 + OpenRouter with fallbacks if the preferred model for a given agent isn't available for whatever reason. Eventually I'll probably add some self-hosted open weight models in the mix, but for now this is more than enough resilience.

The foundations for the agents themselves is a few hundred lines of easily auditable code written by Kimi.


Not sure what grok bit exactly offers, but OpenClaw or Hermes Agent seem similar.


> does it _actually_ matter what the code looks like for a desktop app that’s useful to a small handful of people

Not really. But equally, I imagine most people have a similar experience of software development to me - complex, messy and confusing code also often has poor performance and a high rate of bugs.


This is so cool. I've got a couple of iPod Classics in a drawer - alas it doesn't seem to work for them (presumably the colour display adds complexity?). I was wondering if this was possible last time I fished out my iPod - mostly the extra complexity of modern music streaming isn't needed, but bluetooth headphones and casting are great.


It’s just very clearly not “just” $90 a month.

First you need to hire somebody who wants to do it. That costs more than $90 a month. Then they need to install whatever equipment is required to bridge the fridge controller to tailscale. Then finally you have a $90 a month cost.

I agree that corporate probably has the budget to do it properly. But the idea that the costs are just the monthly cost is Tailscale is laughable.


It's true. A person is ginger, but nobody ever says things are ginger coloured. Ginger isn't even really one colour - it's a spectrum of orange-containing hair colours.


Guidelines | FAQ | Lists | API | Security | DMCA | Apply to YC | Contact

Search: