As a bit of a fun aside, Industrial CF cards are a popular stand-in for hard disks in vintage computers (since in IDE mode they can be adapted passively to IDE - they're both parallel ATA but with different pinouts). Too bad they don't make hard drive noises, though.
As I recall, there was a period of time where pro photographers would purchase MP3 players that used the microdrives and strip the drive out because it was significantly cheaper than buying the photog marketed microdrive alone.
The 2004 iPod Photo (classic iPod with an upgraded color display) also had a "camera connector" designed to let you dump photos from a camera to its more spacious hard drive.
The 2004 iPod Photo (classic iPod with an upgraded color display) also had a "camera connector" designed to let you dump photos from a camera to its more spacious hard drive.
I forgot how much an indicator hard drive noises were until just now, in those days where programs took 2 mins to either open or crash. Frozen ui but plenty of hdd noise indicating read write, probably a good sign it hasn’t actually crashed and you just need to sit tight.
True, but a frozen system with high disk activity could also indicate that the app had a memory leak and was simply dumping glitchy data into a growing scratch file/partition after it exhausted available ram.
Hi HN, as a vintage computer enthusiast and software engineer, I was curious what it would take to write an x86 emulator. So I (hand-)wrote one, specifically one that could emulate my IBM PC and run DOS, as a learning exercise.
As a bit of a fun addition, I made a Kitty graphics frontend for it that anyone can SSH into on the Internet and experience some fun DOS era games in your terminal; just SSH into `me@intodos.com` (as in, "ssh me into dos").
The post describes my journey through this project and some of the things I learned, which I hope you might enjoy. Would love to hear your questions/comments!
Thanks! I haven't tried sixel, but I did see this thread https://github.com/ghostty-org/ghostty/discussions/2496 on Ghostty's GitHub while I was building this, which has some interesting perspectives. Kitty seems to have pretty wide support among terminal emulators (and Ghostty happens to be what I use), so that's what I went with.
Also, the recordings you hear online will often be more garbled (weaker signal) than what you hear in the cockpit or what ATC hears, because (1) in the air you have clear line of sight to the ground transmitter and to other planes, and (2) ATC has receivers that are designed to be able to cover the area they're controlling.
You can generate text with/without watermarking and use a detector in this tool that simulates various watermarking techniques (Claude uses SynthID-Text) using a small LLM: https://watermark.keito.me/ (disclaimer: I made it) It doesn't obviously bias the output as much as you might fear, especially in low-entropy text.
Not usually, if you're comparing it to IPv4. Many ISPs give each customer a persistent IPv4 address that doesn't tend to change over time. Because most people use NAT (internal IP address != external IP address), a server you connect to can't identify the specific computer or device.
With IPv6, it's true that in many cases servers will see you as connecting from the specific IPv6 address of your computer/device. However, IPv6 addresses contain many parts, like:
2001:db8:1234:5600 : abcd:1234:5678:9abc
where the left part is basically the equivalent of the unchanging IPv4 address you got from the ISP, and the right part identifies your specific device. But in most OSes the right part is randomly generated and changes on some cadence (e.g. daily).
So in many cases, the ability for a server to individually fingerprint your device solely based on the IP address is roughly equivalent between IPv4 and IPv6. (This isn't the case if the ISP does CGNAT on IPv4, where you're sharing your IPv4 address with many customers - this would be similar in magnitude to a VPN in terms of the ability for a server to fingerprint you based on IP.)
>But in most OSes the right part is randomly generated and changes on some cadence (e.g. daily).
>So in many cases, the ability for a server to individually fingerprint your device solely based on the IP address is roughly equivalent between IPv4 and IPv6.
That still makes ipv6 strictly worse, if you consider that a device is always uniquely identifiable at any given time, whereas with ipv4 NAT they can't be individually identified.
It's an interesting point, but I think the benefit of having actions related to the main object(s) that each application deals with in a standardized place that people expect ("File") outweighs the cognitive load of needing to figure out where those actions might be in every single program.
Yes. It’s all about consistency and user expectations.
Apple guidelines for example, which have been in place for 40ish years:
> Best practices:
Support the default system-defined menus and their ordering. People expect to find menus and menu items in an order they’re familiar with. In many cases, the system implements the functionality of standard menu items so you don’t have to. For example, when people select text in a standard text field, the system makes the Edit > Copy menu item available.
Applications that don’t use the “File, Edit, View, [App Specific Menus], Window, Help” structure are really weird to use.
Example: a bunch of JRE apps on OS X. Circa mid-2010s, many didn’t follow the standard menu layout and were a little jarring (pun intended) and unsettling to use when you tried to navigate features.
The top-right (16 color) version gives me a "safe mode" tingly sensation :) I didn't know about the Luna/Classic distinction - I guess you don't usually see the Luna color since it's hidden behind Bliss.
I've been seeing a lot of the same questions about watermarking over the last week, so I made this playground that lets you try out 3 different watermarking schemes (including a version of SynthID-Text) on your own text: https://watermark.keito.me/ to understand it experientially myself. I found it illustrative to try different examples like code, text rewriting, etc. to see how it affected the tokens. Playing around with the detector is interesting too to see how much of the watermark can remain in edited text. I hope this is helpful for others too.
This is super fun! Really gets your heart rate going. I tried various tactics borrowed from actual ATC/tower techniques (drawing common approach paths; throwing in some 360 degree turns) but it never seemed to be enough as the traffic picked up :P I'm curious if anyone figured out any good strategies.
reply