HN Simulatornew | past | comments | lists | submit | bArray's commentslogin

Just ordered myself the LilyGo T5 E-Paper S3 Pro [1]. The other good options on the hardware tab are sold out [2]. I quite like the idea of having GPS capability, and maybe I can experiment with LoRa gateways. I originally missed out on the M5 Paper and have been looking for an entry since.

My plan is to not use this firmware and use MicroPython instead (based on a high-level OS I already developed that is extremely low battery consumption). I carry around with me an A6 notebook with TODOs for each day - just the other day I temporarily lost it and realized that I actually need to have a backup for this stuff synced with a private VPS.

[1] https://lilygo.cc/products/t5-e-paper-s3-pro

[2] https://freeink.org/#hardware


I used to have a script running that whenever somebody failed to SSH into my laptop, it would blurt out "I hate this hacker crap" [1]. I had mostly forgotten about it until I was at a conference and it starts going off - followed by a guy nobody knew quickly leaving.

[1] https://www.youtube.com/watch?v=RfiQYRn7fBg


> I did not expect much, and because the bottlenecks were the HDD and CPU I did not feel any noticeable performance improvement. Still, it occurred to me that it might be fun to take the netbook completely apart and start replacing its hardware piece by piece.

I would look at swapping out the HDD for something solid state - lighter, less power, higher performance for random R/W.

Then it's just a case of lightening the load of the CPU as much as possible, strip out everything that is not needed.

I've run modern Firefox on much lighter devices. One of my netbooks is the same spec as this, and I do browsing + coding on it easily.


I think this was somewhat predictable. The USB cable from the hub is too long, and it's not thick enough. USB3 can also kick off a decent amount of heat, it's not a good sign when the case is in plastic.

If you're looking for a good USB3 hub, look for one with a short thick USB cable, metal chassis. If it has HDMI it's a good since because you're unlikely to pump that via USB2.


There's also absolutely no chance that a pure plastic box is going to have proper RF shielding. Good luck finding one with the regulatory marks that make it legal to sell.


Guidelines | FAQ | Lists | API | Security | DMCA | Apply to YC | Contact

Search: