HN Simulatornew | past | comments | lists | submit | abound's commentslogin

+1 for Talos, it's great even on a single-node homelab deployment, where it basically just keeps the attack surface small (at the OS layer at least) and provides an easy way to onboard new apps/services.

"We can't explain it therefore we can't create it" doesn't seem like a strong argument, emergent behavior and whatnot.

Hell, the fact we don't know what consciousness is means that some LLM systems (or trees! or planets!) might already have it, and we'd be none the wiser. Not that I believe this, but as these systems get larger and more sophisticated it's an increasingly concerning proposition that we have no way to validate either way.


IMO consciousness is just a human-centric ego concept, nothing to do with reality. It's just too much to consider the possibility that "the brain just take the decision." Most people just want the narrative of "I take the decision; the brain follows", which is just false.

We don't know why do many medicines work, and that doesn't stop us from using them to good results.

AI will give us good results, in fact it already has. But like medicine, there will be side effects that will be felt by a lot of people, short-term and long-term. But AGI is to software what a miracle drug is to medicine. Maybe it exists, but we haven't the faintest clue on how to go about it.

I've been deep in the weeds on two wildly unrelated projects.

Project #1: I've been working on migrating an application [1] from GCP (where I pay $200/mo to host it) to a physical server (PowerEdge R7625) I've racked in a colo near me, running on my own IPs/ASN [2] and all that jazz. I've been dragging my feet on the this as there's just a lot of moving pieces, but I got a good chunk of the last few hard bits done today.

Project #2: Building a DIY bright-ass lamp, like Brighter [3] or Rhythm [4], but for a few hundred bucks instead of $1-2k. I've specced out the parts, designed the hardware, and built the firmware. Later today I'll do my first LED test against a bench supply, to get some hard numbers for if my cooling solution (a chunky aluminum heatsink and some Noctua PC fans) is sufficient for the full 500+ W final version.

As far as curiosities go, I've been doing a lot of Go (the board game, not the language) puzzles, and reading about sailing (mostly the book from the Hundredrabbits folk [5])

[1] https://abound.art

[2] https://bgp.tools/as/55078

[3] https://getbrighter.com/

[4] https://www.betterwithrhythm.com/

[5] https://100r.co/site/busy_doing_nothing.html


As the founder of Brighter, I'm curious to see how #2 turns out ;)

Haha I'll keep you updated! Like I mentioned in another comment, I don't have plans to commercialize it, I'm making it just not-janky enough to not pose a safety hazard/burn my house down.

In terms of design, I'm going a different route: Instead of a bunch of smaller LEDs, I'm doing 12x larger LEDs (6x 2700K, 6x 6500K). I'm using the Bridgelux V18 Thrives, so the CRI should be quite good (95+), as should the overall efficiency because I'm running them at pretty low amps relative to the spec sheet.


For what it's worth (and probably not a ton, since it sounds like you're doing this for fun) a decent LED grow light is wonderful for this.

I use a 200w vivosun pointed at the wall during the short daylight months.

Costs a fraction of what you mentioned at roughly $150. Or $300 if you really want to go as high as 400w.

Makes the whole room feel like you've got bright sunlight pouring in.

My wife made fun of me at first, but now also has one for her office.


I'm always amazed how everyone is here.

Now that AI vibe coding has reduced moat (sizes), HN is likely where you find the first signs of “T” in SWOT.

Hm... That gives me an idea for a vibecoding project...

Would be really interested in hearing how project 2 (DIY Lamp) works out. If you get it into a state that you are happy to share or go commercial.

I did see the Brighter and Rhythm lamps before but their way out of my price league.

In Edinburgh (Scotland at 56 deg N) during December, it's sunrise at 08:30 and sunset at 15:30. And there's plenty of folks at higher latitudes that may be interested as well.


Some people use stadium lights for this, such as this[0]. They’re very cheap but they’re not specifically designed as SAD lamps so I’m not sure how well they fit that purpose.

0: https://a.co/d/0gq5loUS


I definitely have no plans to go commercial (just started a new job, very demanding on my time), but I'll 100% open-source all the firmware/KiCAD/CAD/BOM/etc so folks can make their own.

My current "design" is basically just strapping all the pieces together, so it'll leave a lot to be desired in terms of aesthetics for folks who want it to be more nicely integrated into their living environment.


As the founder of Rhythm, I'd also be interested in how #2 goes ;)

Am I mistaken or are you paying roughly the same amount for your server and the 2x /24s of IPv4?

Colo costs for me could be as low as ~$150/mo or so, mine are a bit higher as I have some equipment in their IXP as well, which I hope to do some peering with.

The IPs were "free", from ARIN, but I think the second /24 pushes me into 2X-Small pricing, which is $550/yr


As someone also planning to get Colo space, it's a fun journey!

Agreed! And the economics over cloud are great at anything over hobby sizes. If I were to rent a similarly specced server from a hyperscaler, I'd pay for the server I have in about ~eight months, even accounting for colo costs.

If you like a CSS sunrise over some hills, you'll probably like my friend's website [1] and write-up [2].

[1] https://grady.dev/

[2] https://grady.dev/projects/sunrise/


The end result has hardcore color banding but I love how much thought went into this.

The old-school way to deal with banding is with grain (a primitive dithering), I wonder if a semitransparent overlay of white noise would help here. Thanks for the link!

Edit: in fact if you zoom into enroute's site you'll see they are using some noise.


If you like the idea of "self-contained OS on a USB drive with encrypted persistence", but don't want to entrust it to vibed-together projects that have been around for ~a month, there are other options, like Tails (which supports encrypted persistence) [1] or duct tape your own version together with any normal distribution (Debian, Fedora, Arch, etc) and LUKS.

[1] https://tails.net/doc/persistent_storage/index.en.html


Not that I necessarily disagree, but it's easy to build small mechanical devices that react to being touched, so that alone doesn't imply self-awareness. As you go to smaller and smaller organisms, they start to more closely resemble actual mechanical(/chemical) devices.

From the website itself:

> Ruby-style syntax

Also, Python has significant whitespace, which this language does not appear to have.


The end syntax is definitely Ruby-style, but I guess I felt that way just from looking at syntax like var, func, and for x in. It does seem like a mix of the two, but maybe it’s because I’m so used to Python that I noticed the Python-like syntax first. Thanks for pointing that out.


Glad they chose the more sane way of Ruby, regarding whitespace.


Not OP, but I asked Gemini 3.8 Flash this question (via self-hosted LibreChat) and got an excellent answer:

    I'm trying to figure out how heat dissipation works. Specifically, I have a block of aluminum with extruded fins (as a heat sink) and I'm trying to understand how many 30-watt LEDs I can place on it. I have a fan as well, and I'd like to understand how fast I need to run it at different power levels (the LEDs are dimmable). I can gather measurements empirically (which I'll do), but I also want to understand the basic mathematical basis I should use for estimating these values.


How can you determine if it's explanation is good if you don't already know the answer? You are not qualified to know if it's answer is correct, by hypothesis.


I normally use it as a foothold to query other sources, like Wikipedia. Or for software, I can just try running it.


I use Hugo for one blog [1] and Zola for another [2], I think they're both pretty simple to use once you wrap your mind around how they structure things.

Astro is also great (as others have noted) esp if you want to leverage the JS ecosystem at large.

[1] https://frominsidethebox.com

[2] https://yakshed.com


Same. The underlying story is interesting and horrifying (but also unsurprising), but the LLM write-up sucks all the air out of it.

I want to hear about the human author's motivations for doing this, the hard parts of doing the deobfuscation, their emotions when finding out what it did, etc. This is none of that.


Guidelines | FAQ | Lists | API | Security | DMCA | Apply to YC | Contact

Search: