Agreed, this is likely going to change the landscape for people ekeing everything out of an AMD-based HEDT.
To take full advantage of it, folks likely will want A) a new motherboard with likely a new chipset to support the higher frequencies and B) higher frequency DDR5.
I’d love more memory bandwidth with the limited 2-channels I have, but the 2x48GB (96GB) of “tuner memory” I bought in February 2025 I’m not even sure is manufactured anymore. I paid $440 back then, and my understanding is it’s not produced now, and commands $2500 - $3000 on the second-hand market.
In the U.S. the following brands are affected (systems were proactively taken offline):
* Food Lion, 1100 stores
* Stop & Shop, 400 stores
* GIANT/MARTIN, ~190 stores
* Hannaford, ~160 stores
Websites are down at the very least.
May affect ability to place online orders for pickup and delivery.
Mobile apps are down.
“In-app coupon” redemption is likely down.
US brand physical stores are open and selling to customers.
This was the result of what unfolded after regional electricity prices spiked (550%) after a corporation decided to take a lot of local power for itself.
After local opposition began forming, Shiawase Corporation made a false flag attack against itself to influence a future ruling where it could then defend itself similar to a sovereign nation in a foreign land. So full corporate “extraterritoriality”, to where maintaining its own regulated militia/defense force would be legally free and clear.
I looked at multiple configurations, and mathed it out. With leasing, you pay ~75% of the capital cost (excl. tax) over 3 years, but end up with no asset.
Apple computers tend to have excellent resale value, and Mac Minis/Studios have the least depreciation of them all. I understand the benefits to both taxes and cash flow, but boy is Apple winning big on those lease offers for Studios.
I believe “The Homer” is a reference to Season 2, Episode 15 of The Simpsons, “Oh Brother, Where Art Thou?”
Homer reunites with his long lost brother, who runs car company Powell Motors. Homer is ultimately tasked by his brother with helping to design a car for the “average man” that ultimately bankrupts the company for being wildly overengineered and costing too much ($82,000 in 1991-money).
Indeed. Something to note is the labor force participation rate keeps dropping. We’re down to 61.4%. It was 61.5% in June 2026, 62.3% in June 2025.
We also have 4.8 million that are part-time employed, but want full-time work. That’s up from 4.7 million last month, and up from 4.5 million in June 2025, and up further from 4.2 million in June 2024.
There’s also 6.0 million that want a job, but aren’t employed. This is the same as June 2025, but up by 800,000 since June 2024.
So if you take the U-3 number (what’s reported) then factor in the other two figures, you really have 10.5% that are unemployed, discouraged, or underemployed.
—
The other question never answered is, “How many jobs are needed to create equilibrium?”, or where the employment rate remains stable. That’s NEVER talked about by media or the BLS, but it’s actually not difficult to get an approximate answer.
You’d want to look at population growth rates for 18-22 years ago (as those people would now be entering the workforce), multiply that by the labor force participation rate, and then divide as appropriate for the period. Typically, the US economy would need 140,000 - 145,000 new seasonally-adjusted jobs created every month to maintain a steady employment rate, given its historic and current population growth rates.
>Indeed. Something to note is the labor force participation rate keeps dropping. We’re down to 61.4%. It was 61.5% in June 2026, 62.3% in June 2025.
Yes, it's called people getting older and retiring. It's pretty obvious that's the cause if you compare the labor force participation rate overall vs for 25-54 year olds.
If you're referring to a toploader NES (NES-101), it does not support RGB out of the box, and actually only has an RF-out jack back there.
A top-loading Famicom (Famicom AV, HVC-101) instead has the Multi-Out port similar to the SNES, N64 and GameCube. However, it doesn't support RGB out of the box, and needs to be modified.
You can modify a NES-101 for RGB output as well, the issue is for the NES-101 you also need to also add the Multi-Out port to replace the RF output.
Typically the NESRGB board is what most folks will add to support RGB output. Again, for an NES-101 you have to physically add the Multi-Out port as well.
-- -----
With a Multi-Out port you now have new options for suitably modified consoles to go from the Multi-Out to Mini-HDMI with something like the RAD2X which has a vastly simplified RetroTink multiplier/upscaler inline to give you a "plug-and-play" HDMI output that detects Composite, S-Video or RGB and outputs appropriately without any need to configure. That cable works across the Famicom AV, SNES/SFC, N64 and GameCube. It adds about 53 microseconds of latency, or ~1/315th of a frame.
However you can still do Multi-Out to Composite, Multi-Out to S-Video, or Multi-Out to RGB if you wish to use some other multiplier/scaler such as an OSSC or anything else you have.
Long story short, you can have an amazing picture, with a simple HDMI adapter, on nearly any old console at this point. You have to either learn to solder, or you can pay someone to do it. There's a lot of options from simply buying an upscaler and plugging whatever you have in, to modifying for maximum image quality and/or ease-of-use.
Generally, I recommend most folks "keep it simple" or at least have the "easiest to use" option (in lieu of maximum quality) on hand. If you can take it out of storage, hook it up, and start playing within 2 minutes, generally that removes the friction you'd have and you'll actually play it. Flash carts are also a great "friction remover".
For those who like their old Game Boy, Game Boy Color and Game Boy Advance, remember that the SNES had Super Game Boy/2, and the GameCube had the Game Boy Player (also supported GBA). There's a lot to be said for playing those handheld games on a TV, with a wireless Nintendo WaveBird controller.
Though for those chasing what's possible, those options exist too, but trade off that "pick-up-and-play" factor :)
It is a lot of work and usually not cheap to get old consoles to capture properly, so I am only bothering with Nintendo consoles as that is what my childhood was. At the time of writing, I have solutions to play games on original hardware from every console apart from the Nintendo 64 and Nintendo DS family. Not because it is not possible, but rather that I can not justify the expense at the moment.
reply