Most parts of the planet have never been survivable to humans. That's why we have invented fire, clothes, houses, air conditioning, water pipes, etc. And that continues to be the case whatever happens to the planet.
Interesting. Air is approx 1 kg/m^3, so that tank is 0.4 kg at 1 bar, and a typical COPV can go to say 300 bar, so we're talking 120 kg.
For a 1000 kg car and with 200 m/s nozzle exit velocity, to hover the car you need (with m_0 g = m_a v/t) about 50 kg of air per second, so we're talking about roughly 2.5 seconds of flight (from those 400 litres).
I believe the COPV was capable of 10k psi [1] or ~690 bar. The 400L is in addition to the 200L tank giving 600L total, which means roughly 300 kg of nitrogen. At that pressure the Z factor is around 1.5, so it’s closer to 500 kg/m³ than the 690 the 1 kg/m³ approximation gives. With the car at just under 1700 kg [2] you need about 83 kg/s to hover at 200 m/s, so you get roughly 3.5 seconds. That’s before tank mass and pressure falloff though.
Damn, maybe it doesn’t matter and a flying car has many other things to worry but I’d be shitless scared to sit next to anything that has 690bar of hydrogen (or even air).
The answer is Black Spruce with 11 billion tons of biomass.
The infographics is worth looking at. All animals are just 0.4% of total biomass, and most of that is arthropods, fish, annelids, molluscs and cnidarians. Humans, live stock, birds and wild mammals combined are just about 0.02% of the total biomass.
We've now learned that this isn't true for all migrant groups, and it has been an extremely costly mistake to make. Demographic replacement can't work positively if the productivity of migrants is below of the original demographic, and actually makes the situation worse. Europe might have learned this too late, but at least now EU and most European countries are changing course.
You're wrong. The best-selling vehicle is the Flying Pigeon bicycle, the standard bicycle from Mao-era China with more than 500 million produced since 1950.
It's a stroke font / SHX font produced by the CAD software, but difficult to know which one. They aren't actual fonts, but just single-stroke vector shapes. Claude thinks it's from PTC Creo Parametric, but I couldn't find any clear examples to confirm or deny.