I would have killed to be able to use the machined aluminum case.
The number one reason we had to retire PCMCIA cards on the flight line was the stamped steel case getting caught on something and bending one too many times. We could fix it a few times, but they wouldn't fit in the aircraft after a while (tighter tolerances than the laptops).
When we designed the prototypes with stainless steel cases we potted the internals (and case) with thermal epoxy to make them more rugged. It made them super strong and durable. We had a lot of issues with machined aluminum cases not fitting well in a bunch of readers because of the tight tolerances.
Yeah, the aircraft had insanely tight tolerances. Generally due to shifting during g-loading causing wear on the connector if the cards had ANY wiggle at all.
All current US military aircraft (at least up through the F-35) use CF cards to take mission planning from the laptops in the SCIF (or whatever unclass space they are using) to the aircraft.
As an aside, LCACs (among other platforms) also use these systems and cards. So this is a pretty widespread use case.
I heard recently The F-16 updates are known as "tapes". So like "M6 tape brought this and that feature but there was a serious issue so had make a M6.2 tape". The source did not clarify if the fighters literally load software from tapes and I was too afraid to ask...
It's the right size for the job. It's small enough to be easily carried around, and big enough that it can be handled while wearing heavy gloves.
They're big enough to have labels on them.
The drive encloses and supports a PCMCIA card on five sides, and locks it into place, so it stays seated while fighter planes do fighter plane things.
PCMCIA cards were an excellent choice for military purposes.
MicroSD cards are too tiny to handle with gloves or outdoors.
In this application, you want a visible label on the device, since the card contains mission specific data and there are other similar cards around.
USB drives supported only by their own connector are not well supported against G loads and vibration.
So they had a great solution. It just became obsolete because everybody wanted tiny laptops and phones.
I concur with this, and it's the same reason I've standardized around the Samsung external SSDs. Come to think of it, they're kind of a similar volume to PCMCIA cards, albeit not as long, and I have each of mine labeled. I also know, positively, where they all are, which I can't say about any of my microSD cards.
A lot of computational models today still use "tapes" and "cards" terminology; they started from (or still are in) Fortran. Cards are files containing the parameters, and tapes are the bulk I/O.
You get errors like "Entry in Card 2A column 4 cannot be zero" and hopefully your front end GUI translates that into the field name.
i was going off of memory....been using tar for about 30 years, lot's of time for the truth to be revised by random bit flips in the brain. maybe the man page is more authoritative?
"hence the name of the program, which stands for tape archiver"
I never worked in civilian power generation, but I can vouch for this on Nuclear Ships.
We had to practice load pickup on a normal start at the pier often, but we likely practiced a full SCRAM to back online (including a FULL load shutdown) more.
Having predefined lists of what gets brought up at various points helps a ton, but it's still not an easy or simple operation.
It’s much the same principle as with an electricity grid, but on a different scale. We start up diesel generators to start gas turbines, which in turn supply power back to the distribution substations.
Once we’ve restored power to the substations, we can carry out what are known as voltage restoration operations.
At a nuclear power station, if all goes well, there will be at least one nuclear reactor unit that has managed to operate in island mode. They have their own sub station and can restart the others units.
We restart as many units as possible on a virtually empty section of the grid (serving only essential and vital consumers such as hospitals). We then reconnect consumers in a predefined order to avoid significant fluctuations that could trigger further cascading failures.
The most difficult part is often identifying the exact cause of the blackout with certainty, so as to prevent it from repeating it.
I never worked on nuclear ships, but I can vouch for this in Satisfactory.
You need a temporary source of power to start the water pumps and it takes a while for the water to flow all the way through the system and for the coal to saturate all the belts and power plants, if you hook it up to the main grid before all the plants are operational then it shuts down again.
heh. this is why I've got programmable speakers hooked up to the belt that feeds fuel to the steam generators in my Factorio world - because I had one too many times where I moved something or messed up my logistics and had to cold start the base by hand feeding coal to get back online.
Factorio makes this fairly easy for the most part, a cold start isn't really some massive engineering challenge, but still, worth guarding against. By the time you get solar and / or nuclear power is basically solved, at least on Nauvis, but it's "overengineering the game," so... we overengineer.
Yeah, Gleba seems deliberately set up to make brownouts risky (letting your supply of trapped pentapod eggs hatch and eat your base) and black starts harder - base fills up with spoilage which needs to be removed. At least you can burn the waste for fuel.
In Factorio, solar is an easy source of cold start. In the real world, I think hydropower is a commonly designated choice and the solar farms have to wait for a grid to sync against.
Cold starts are a constant in Aquilo until you research and build fusion power. And whatever you do by hand to handle them, there's a device in the game that does it automatically too.
I imagine the predefined list is easier when it's all consumers that are under your control. I figure with civilian power some random percent of houses'll kick their AC on after power is restored.
It's why they bring up a subset a bit at a time and fewer houses/businesses than would be expected under average load, Practical Engineering has a fantastic video on black starts[1]
Yup, stopped using SLS toothpaste because I heard that it could be causing my canker sores. I've had ONE in the three years since, when they were a weekly occurrence before.
also, when I was young I worried I might have herpes or something, but doctor told me canker sores are different from cold sores. Later in life, turns out there might be a chance I have crohns?
there's a big constellation of autoinflammatory health issues that affect people, especially the autistic/adhd types who might find their way to Hacker News in large numbers
if you are not already familiar, you should have your doctor go through https://allbrainsbelong.org/clinician-resources/ (this is a nonprofit's project funded through an HHS grant) and see what actually applies to you
Crohn's, irritable bowel syndrome, regular old heartburn, brain fog, chronic fatigue, depression, sleep apnea, hives, rashes, waking up in the middle of the night, heat sensitivities, Ehler-Danlos, joint issues, vascular issues, dizziness on standing, arthritis, long COVID... it's quite the list!!
(and it's really frustrating when (e.g.) a cheap allergy medication can solve half your problems and you go without it for years because no one's thought to connect those dots)
I do have autoimmune issues, but I had a totally different gut issue that they basically hand waved as IBS due to those until a different set of docs realized it was a dysfunctional gallbladder. I had been dealing with weekly gall bladder attacks for a decade and then they pulled it.
Just to say, be careful with the diagnosis. They can be rather imprecise.
Some unsolicited advice couched as experience that may or may not help you:
I struggled with this off and on for years, and still do if I don't take some specific actions. They aren't a total fix but they help.
Turn off the air handling in your house and open it up at one point in the day, preferably a few hours opposite of the seasonal trend (early morning in the summer and early afternoon in the winter). During this time go take a decently long walk in appropriate clothes. When you come back close back up and set the thermostat to whatever the temperature cycled to.
This tends to work to shift seasons more naturally as well. If its hot outside it will feel cooler inside even if the temp went up a degree, and this compounds all season. The reverse is true in the fall/winter.
If I don't do this I struggle very similarly to you all year.
Typically daily. They were used for troubleshooting and repairing military avionics. They survived decades onboard ships, etc. They got temperamental in their later years, but we kept them going.
If you have any interest you can search up the (sparse) information on the AN/USM-484 Hybrid Test Set (or System).
The number one reason we had to retire PCMCIA cards on the flight line was the stamped steel case getting caught on something and bending one too many times. We could fix it a few times, but they wouldn't fit in the aircraft after a while (tighter tolerances than the laptops).
reply